Category: Business and Management

attaching instructions for the assignment. I would like for it not to sound too teacher like, I am a freshman in college, I would like it to sound as such. thank you.

follow the instructions in the file video assessment.
I’ve also attached the original idea file titled innovation.

all you need to do is fix the PEST AND THEN FIX THE WINDOW OF OPPORTUNY TO FIT WITH THE NEW PEST.  (FOLLOW THE GIVEN FEEDBACK FROM MY GROUP MEMBERS TO REWRITE OR EDIT MY REPORT) I also added a report i asked chat gpt to create to potentially help you not sure if the chat one is good but make sure to follow the given feedback in my section and that theres no AI or PLAGIARISM in my part.

Using the attached document Research Topic;
Review and develop the information belo:
Statement of the problem,
Situational Analysis,
Premise,
Definition,
Limitation,
Delimitations,
Introduction if relevant. You can keep thesame Introduction as the one in the attached document as needed

submit in spreadsheet attached This exercise is designed to give you experience practicing using Solver before your final project submission, which is due in Module Seven. It’s recommended that you complete this assignment as early as possible. That way, you’ll have time to post to the General Questions discussion if you have any questions or problems.
Directions
In this assignment, the scenario is to figure out which combination of manufacturing tables and chairs is the most profitable. The Linear Programming Solver Document, linked in Supporting Materials, will help you with the assignment. To complete this assignment, follow the steps outlined below:
1. Part 1 of this assignment is ungraded, but it will help you understand how a table is set up to run Solver.
A. Open the Module Six Assignment Spreadsheet, linked in What to Submit, and make sure you are on the tab (worksheet) titled “Solver Part 1.” You’ll see a spreadsheet that’s been set up to use Solver. (Note: There is more than one way to set up and program a table; the tables used for this exercise show one method.)
i. The table highlighted in gray shows the specific amounts of material, fabrication time, and output needed for each chair and table. It also shows the total cost of producing each item.
ii. The table in blue calculates total profit from producing both tables and chairs.
iii. The table in green tracks the amount of materials and fabrication consumed to produce the volume that will be decided.
iv. Lastly, the yellow cells on the green table indicate the materials and fabrication time, as well as the output volume minimums set by management.
B. Click on each cell to look at the programming used, but don’t change anything.
C. After you review the programming, click on the red cell. Go to the menu bar at the top of the page and click on the Data tab. Then click on Solver. The Solver dialog box should open. You can see which cell has been identified as the target cell and which cells Solver will change. You can also see how the constraints have been entered. Don’t run Solver at this time; simply click Close on the dialog box.
2. Now you’ll practice running Solver and viewing two of its associated reports. Click on the tab at the bottom on the screen titled “Solver Parts 2 & 3.” You’ll see the same data tables from Part 1. Follow these steps:
A. At the top of the worksheet, click on Data, then Solver.
B. Find the Solver Parameters dialog box and click Solve.
C. See how the cells with the zeros now have been assigned values.
D. Do not close out of the Solver Results dialog box.
E. On the Solver dialog box, run a Sensitivity report and a Limits report.
F. In the area indicated in the Part 2 section of the “Solver Parts 2 & 3” tab, type a short paragraph explaining what these reports indicate.
3. In this step, you’ll change the variables and constraints and run Solver again.
A. Imagine management has changed their decision and has increased fabrication time from 480 minutes to 600 minutes. They’ve also increased the minimum number of chairs to be produced from 10 to 16. Run Solver again. List the number of tables and chairs that should be produced in the provided table under Part 3a of the worksheet.
B. Now imagine too many tables have been rejected by quality assurance. The production line for tables will be slowed, increasing fabrication time to 26 minutes. However, management has also found a way to decrease fabrication time on the chairs to three minutes. Use the original constraints for fabrication time (480 minutes) and the minimum tables (4) and chairs (10) and run Solver again. List the number of tables and chairs that should be produced in the provided table under Part 3b of the worksheet.
4. Use the tab labeled Solver Part 4 to complete the following:
A. Create and program a spreadsheet with data based on the following scenario:
Scenario
Your company has two trucks that it wishes to use on a specific contract. One is a new truck the company is making payments on. The other is an old truck that is fully paid for. The new truck’s costs per mile are as follows:
· Fuel/additives: 54¢
· Truck payments: 24¢
· Driver: 36¢
· Repairs: 12¢
· Miscellaneous: 1¢
The old truck’s costs are as follows:
· Fuel/additives: 60¢
· Truck payments: 0¢
· Rookie driver: 32¢
· Repairs: 24¢
· Miscellaneous: 1¢
The company knows that truck breakdowns lose customers, so they have capped estimated repair costs at $14,000. The total distance involved is 90,000 miles (to be divided between the two trucks). Set up and program your table, then be sure to write a rationale statement.
B. Use Solver to determine the number of miles each truck should be driven.
Specifically, you must address the following rubric criteria:
1. Run Sensitivity and Limits Reports correctly, then explain what they indicate.
2. Adjust variables and constraints to produce the correct Solver output.
3. Create a spreadsheet that correctly runs Solver.
4. Write a rationale statement that fully addresses programming decisions.
What to Submit
Your assignment must be submitted using the Module Six Assignment Spreadsheet. Use 11-point Calibri font.
Supporting Materials
The following resource supports your work on the assignment:
Reading: Linear Programming Solver Document

Organizational Structure
Course Project Assignment: Organization Structure
Overview
When structuring an organization, the leadership team carefully considers employee roles, managerial responsibilities, and the departments through which information and decision-making flow. The framework must be logical. Communication must be transparent. A global mindset must be maintained.
For this course project assignment, you will create your organizational structure chart. Then, you will write a brief description of your framework and ratio for choice.
For more information, please refer to the Assignment Guidelines page. 
Directions
This course project assignment consists of two (2) parts:
Part 1: Read & Review Resources.
Part 2: Create Your Organizational Chart, Strategy, & Rationale.
Resources:
https://www.forbes.com/advisor/business/organizational-structure/ 
https://www.indeed.com/career-advice/career-development/types-of-organizational-structures
https://www.oreilly.com/library/view/principles-of-organizational/9781119828549/
https://www.oreilly.com/library/view/principles-of-organizational/9781119828549/c29.xhtml
Organizational Chart
Next, create your organizational chart. This is a visual aid/graphic similar to a flow chart that represents the scaffolding of departments and leadership. 
Review the Media Hub, a multimedia resource guide/ERAU,Links to an external site. for suggested software tools and resources you can use for your course activity. 
Canva and Lucidchart have templates and walk-throughs available:
Organization Chart Templates (Canva)Links to an external site.
How to make an organizational chart (Lucidchart)Links to an external site.
Feel free to use templates or create your own.
Strategy & Rationale
Lastly, write a 1-2-page explanation of your organizational structure strategy and rationale. Why did you use this framework and approach? How will this structure function effectively with a global mindset?
Cite all resources according to APA format. (See the Writing Style Guide for assistance.)
Writing Guidelines 
Adhere to the following writing guidelines:
Stay within the 1-2 page range.
Use transitions to ensure a smooth, logical flow of ideas.
Proofread your work to find and fix grammatical errors.
Include a reference page (if applicable). This does not count towards your 1-2 page range requirement.

Format: Typed in single-spaced, 12-point Times New Roman Font with regular A4 paper margins. Write 2-pages and
add a 1-page activity map (you are welcome to go over 2 pages of written analysis but no more than 3-pages of written
analysis is necessary). You do not need to reference every statistic, especially common industry ones, but if you are quoting
someone or a source verbatim, then I would like you to make the proper citation in any format of your choice.
This  is Japanese company PPIH, there are store in over world, but please forcus on domestic. If you have any questions, let me know.
here is feedback from professor.
I see an outline of a good analysis concepts. If this was a daily assignment, I would grade it as an A paper. However, I think there might have been a misunderstanding as I was expecting an ‘essay’ format in the same lines as the McKinsey and BCG newsletters that I asked people to read and you have neglected to incorporate some of the points that I asked for in the guidelines such as market space, data points and quantitative analysis. I am asking for a couple more additions if you wish to resubmit (there is no need to re-write, you can attach a 1-page beginning and a 1-page appendix). And I will grade this submission as is instead of averaging the two papers. Feedback Points: 1. You need at least a one page ‘intro’ that is written in essay form. In this part, you need to establish the market space that you are going to describe, presumably the Japanese retail sector where you highlight the Convenience stores, the Supermarkets and the Department stores (as an example of three distinct players). I hope to see data points incorporated here with the data points such as market size and customer numbers and the daily usages. You need to also establish the 3Cs structure here with customer sections, competitors sections and finally the company section (which you have and need to rewrite). 2. I would like to see some effort to add a quantitative analysis using DQ. Students in the past have compared the number of products between DQ vs competitors or even made an effort to look at the cost structure of the Private Brands vs Branded Goods 3. The activity map has more promise (I acknowledge your color code schemes) but to me, I still would not be able to pick out that this is DQ over another retail company. So this indicates to me that you still not have gotten to the essence of this company.
https://www.mckinsey.com/
https://www.bcg.com/ja-jp/

INT 220 Milestone Two Guidelines and Rubric
Overview
In this course, you have explored the elements of a market profile, including cultural, political, and economic aspects, and looked at the legal and regulatory market considerations. In this milestone, you will complete the next part of your course project by creating a market profile for your chosen country and creating legal and regulatory considerations.
Scenario
You are a business analyst working at a small, domestic organization that produces high-quality cell phone cases. Your organization has begun to see its sales flatten in the domestic market. While the organization is not losing money, leadership would like to explore options to continue to grow. One option that leadership has noticed competitors attempting is entering international markets.
You have been asked to examine the benefits, drawbacks, and key considerations for your organization to enter one of the global markets below, and summarize your findings in a business brief for leadership.
Continue to use your selected market from Milestone One. As a reminder, the options for international markets are:
Nigeria
Prompt
In this milestone, you will continue to use the Business Brief Template (located in the Guidelines for Submission section of this document) to complete Section Two. Use course resources as well as the INT 220 Library Guide to support your responses.
Specifically, you must address the following rubric criteria:
Market Profile: Explore and explain the cultural, political, and economic environment of your selected market to help inform future business decisions regarding expansion from the domestic market.
Cultural Profile: Compare and contrast important cultural elements of your selected market against those in the domestic market, including communication, dimensions of culture, attitudes, common business etiquette and practices, and at least five other important aspects of culture.
Political and Economic Profile: Compare and contrast important political and economic factors for your selected market against those in the domestic market, including political systems and ideologies, current leaders, economic measures or characteristics used in classification, and government intervention on trade.
Legal and Regulatory Profile: Compare and contrast important legal and regulatory requirements of your selected market against those in the domestic market, including trade restrictions, regulations of products or services, legal processes for business transactions, and import restrictions or documentation.
What to Submit
Template: Business Brief
Submit the template as a 500- to 650-word Microsoft Word document. As you completed Section One for Milestone One, the template you submit for this milestone should have Section One and Section Two completed. Sources should be cited according to APA style

The US Supreme Court has made many landmarks decision with significance consequences. Fine and research.SCOTUS case that has had a lasting impact on your life, your community or the general public. Why did you choose that case and why is it important?
submission method : your paper should be the minimum of 375 words double space with a title page and reference page and text citations. The title and reference page does not count toward the minimum word count. and Microsoft Word document is required, and you must ensure your assignment is properly uploaded by the due date.

The final thesis file is my work, but the results part needs to be rewritten. The second trial thesis file includes the professors’ comments on the file and the results and discussion section has been deleted.
The purpose is the search for consumer behavior in different locations, times and social environment. I also have a file that is the teachers’ feedback on what needs to be done (the future steps and overview of improvements files).
Information about consumer habits in percentages, for example, must be added, but also limitations, future recommendations of this research.
I am attaching the original data set as well as the code file I have written so far. I am not allowed to change anything in the data set, as it is not mine, I have undertaken the analysis only.
Can you let me know about the cost and if it is possible in Python?