Category: Engineering

1. Please read through my professors lecture slides first : EGR4050 – Lesson 3 – MANAGING RISK.ppt
2. You are reviewing proposals submitted for the “Lambert Park Phase 2” project. Then study the MIG and David Volz Design RFP, and use the EvalMatrix Sheet to score their proposals (you dont need to evaluate their cost)
3. Evaluate the risks associated with completing this project by using a risk matrix. Identify at least 6 important threats, define your probability and cost scales, evaluate the risks and list the threats in order from highest to lowest risk.
4.Of the risks you identified, which risks should you mitigate? What steps could you take to manage and/or mitigate the risks you identified.

The Chunnel Project is an interesting
project with many risk considerations. You may be familiar with the
project, you may have even taken a ride in the Chunnel, or you may not
know anything about the project. Once you begin to read about the
project and think about all components of a project of this scale and
magnitude, you will see how many risks had to be considered, mitigated,
and resolved in order to complete this project in a safe and responsible
manner. This is a very interesting project.
Project / Case Assignment #1 – submit a DRAFT
of Parts 1, 2, 3, 4 of this assignment. The draft can be in an outline
form, but must include at least 4 cited sources of the information. DUE
June 23rd.
no plagarism and follow instruction

After reading the Jones & Warner (2016) article, address the following questions:
The paper mentions the IPCC target of keeping global warming to < 2 deg C. What cumulative CO2 emissions are required to achieve this (Gt)? The authors start with population model to 2100 and then project per person energy use. Describe their energy projection. Globally, how many GJ/person-year do they predict in mid-century and at 2100? The authors justify their projection, qualitatively, at the end of section 3 in terms of trends in developed and more populous developing countries. Describe their justification for an increasing global per capita energy consumption going significantly above 80 GJ/person-year. Fig. 3 has two plots that go a long way to summarizing the whole paper - provide a short interpretation of these two figures.

Building Height: 4 floors
Average Daily Traffic: High, especially during weekends and holidays
Expected Load: Shoppers with bags and strollera, occasional delivery of goods
Speed Requirement: Fast during peak hours, moderate during off-peak hours
Safety: Important, especially during busy shopping periods
Space Constraints: Limited space for the elevator shaft due to the need for retail space

I want to write an introduction part of my research paper based on these articles.
(I need a  basic information of memristor). Feel free to add additional references or omit some of the ones I have provided.

Which air conditioning delivering system is/are the most energy efficient? What are the pros and cons of selecting an energy efficient system based on its SEER rating? Support your research with data or case study information. Discuss green technologies as well.

Design and evaluate advance protection relay coordination strategies for protection devices ensuring seamless operation within the grid

Hi! I have missed a lot of lectures about this subject and need to do homework for my engineering class. I need whole calculations and and also epires. I have the 8th drawing, 1st row in table and 1st section of beam.
For the section i need testing of wooden beam strenght for the given 10Mpa, 12Mpa and 7 Mpa.
Important Info
The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.
Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)

this PDF is an example, i need a SOP with my information 
name: faisal mohamed ahmed 
age: 23
univerisity: 
Arab Academy for Science, Technology & Maritime TransporT
faculty: Communication and Elcetronics Engineering
desired MASTER univerisity: 
King Fahd University of Petroleum and Minerals
MASTER interest: Microwave , antenna design.
VERY IMPORNTANT NOTE: NEED HUMAN WRITING 100% without AI reconigition

The report should be a maximum of 20 pages content (excluding table of contents and title/cover page), typed in Calibri or Times New Roman Font (maximum of size 12, minimum of 10) with 1.5 line spacing. Please label all figures and tables appropriately. The graphs (LPF, HPF BPF) for your frequency response graphs should all be on either separate graph paper (see the semi log graph paper) that is scanned into the document or generated with a program such as Excel, Matlab, LabVIEW etc and should be a MINIMUM size of half of one page.